Ask Experts Questions for FREE Help !
Ask
    emtpete's Avatar
    emtpete Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 30, 2009, 10:40 AM
    I have a Cumberland heat pump
    Cumberland
    Model RHPA0251AAA3
    THE REST OF THE TAG IS MISSING DOES ANYONE HAVE THE SPEC. This unit sat in 2 inches of water and they are telling me it need replaced...
    I thought they were made to get wet
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 30, 2009, 10:45 AM
    Just 2 inches of water should not condem the unit but if they tested it just what did they say was wrong with the unit? BTW no such model number is listed in the master unit catalogue.
    Rryzinski's Avatar
    Rryzinski Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jun 28, 2012, 10:37 AM
    I went on service call it is a cumberland heat pump RHPA0201AA2 does trane make this unit if not where do I get parts
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat pump never turns on, handler blows continuous with no heat except with AUX heat [ 2 Answers ]

10 year old Rheem air handler RHBA-21J8MFCA, 1/3HP, 2.8A. New WeSt Columbia, SC 29170, Model 2HP13L48P-1B, HCFC-22, 4TON. Installed new out of box iN July and AC working splendidly but start-up is "violent" and loud. Installer says I need some sort of "start-up kit". I put off as had planned...

Propane heat pump vs electric heat pump [ 1 Answers ]

I am trying to calculate the cost of a propane heat pump vs electric heat pump. I currently have an electirc heat pump but am looking to install a new one and don't know whether it is less expensive to have the propane one installed or the electric. We don't have any natural gas lines in our area...

Carrier Hvac heat pump with aux/em heat- NO AUX HEAT [ 1 Answers ]

I have tried to install Honeywell 7500d thermostat. I get heat pump heat but no emergency heat although the termostate is calling for it. The installation manual says to see authorized agent if I have a dual 0/b on existing thermostat and another wire is attached to common. As of now, I have ...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

View more questions Search