Ask Experts Questions for FREE Help !
Ask
    georgend's Avatar
    georgend Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 30, 2010, 08:24 AM
    I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts
    My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried cleaning the flame sensor and it seems to be working now.
    georgend's Avatar
    georgend Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Nov 30, 2010, 08:40 AM
    I cleaned the flame sensor and it seems to be working now, we will see if it remains working in the long run.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas furnace gas shuts off when fan comes on [ 2 Answers ]

I have a Frigidaire\Nordyne G6RA 096C-16 gas furnace. The electronic ignitor lights the gas. However, when the blower comes on, the gas shuts off. This happens repeatedly. I turned off the furnace, waited a few seconds, and turned it back on. It worked fine for the first thermostat cycle...

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 0 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.

Furnace runs for a few seconds then gas shuts off [ 1 Answers ]

I have an old janitrol furnace the kind you have to ligh the pilot then turn the knob for tha main burners to come on. The problems is when I light the pilot it stays lit, then I turn the knob and all the burners light up and it goes for about 10 seconds then its like you went to the gas shut off...

Gas furnace ignites, then goes out within 15 seconds [ 2 Answers ]

Last winter I had a hot plate igniter replaced. Near the end of spring the igniter would ignite the furnace and after 10 to 15 seconds, the flame would go out. About a minute later the hot plate igniter would glow, the gas will ignite for another few seconds and go out. After several cycles the...

Furnace shuts off gas [ 1 Answers ]

My furnace randomly lights both sides. After the igniter comes on, the gas kicks in on the igniter side but not on the temp. probe side. It seems that the gas doesn't flow over to that side after it comes on. Is it a blocked valve or gas jet?

View more questions Search