 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Genset hunting
Hello, It's from maldives. Have senset.(model no:MDDCG -5768340 ,serial no: F 060937881 ,Spec A ,50kw) genset is running 2 hours per-alarming,in display seeing FUEL INJECTION PUMP VALVE,ABOVE NORMAL - SPN: 1076,FMI:0 . In manual(Closure too long ).What is the meaning of that ? And hunting came high vibration if unload or load.When change the primary and secondary it's come normal.
Thank you. |
||||
Check out some similar questions!
Im in a frustrated need of some information about designing a good genset room. Im buying these 4 unit of 500kva diesel generator with specifications as the followings: A Silent Type engine, 6 Cylinders, bore x stroke of 159x159mm, a dimension of 5(L)x1.8(W)x2.1m(H) while each of the engine...
Can you swicth on capacitor banks when genset is running?
Ihave a capacitor bank connected to my main switch gear. My distribution panel is coupled with a stand by genset through ats. Is there any effect on the genset during the change over of supply from my stand by genset..
Hello, I'm starting a project to hook-up a optional stand-by generator. I have all the wiring for the transfer switch, service panel & essential sub. I need to run about 25 feet of 6/3 from the transfer switch to an outside wall along with a 14/2 (A/C power to the battery charger) and two 18...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
