Ask Experts Questions for FREE Help !
Ask
    need2knowhow's Avatar
    need2knowhow Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2011, 09:33 AM
    Tub faucet too tight
    How do I loosen a one push pull tub handle? It is too tight to pull and push.
    pghplumber's Avatar
    pghplumber Posts: 106, Reputation: 11
    Junior Member
    		  
    #2

    Jan 15, 2011, 10:21 AM
    Need more info. Model/manufacturer if possible. Sounds like you may have a Moen. Most single handle cartridges can be removed after shutting the water off to the tub/shower and opening the valve to relive pressure. If too much wear or build up inside the cartridge has occurred you may want to consider replacing the cartridge as opposed to servicing it. Silicone greases are available for lubing o-rings and moving parts of the cartridges before reinstalling. Do NOT use silicone adhesives/sealants. They are different than silicone grease.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tub to tub/shower conversion: Need to re-route water lines for a shower faucet? [ 12 Answers ]

Hello everyone, My wife and I just moved into an old (1930s) Spanish house in Los Angeles. We have 2 bathrooms, with the master bathroom containing a bathtub and a separate shower stall. The shower stall is tight with a low ceiling and the bathroom has no exhaust fan (only 2 windows) and...

My kitchen faucet will not stay tight [ 7 Answers ]

I have new kitchen faucet installed on Granite. The threaded pipes aren't long enough to completely tighten down the lock nuts. How do I get (and keep) the faucet tight? It is a DeNovo Premier Bridge Brushed Nickel Kitchen Faucet with Spray. Thanks!

Tub faucet handle won't stay tight [ 2 Answers ]

I just took off my tub faucet and handles to work on the wall. When I reattached the handles, the COLD handle won't stay tight. I have to re-tighten the screw when I turn the water off. What do I need to do wo it works right? Confused:ds

Tub faucet [ 3 Answers ]

Ok here go's. I have a problem with my tubs hot water faucet. It does not leak but the faucet just spins around when you try to turn it like it can't grasp on to anything. I would like to fix it myself, but what I know about plumbing you can put in a timble. Is this something I can do myself or...

Tub faucet [ 1 Answers ]

My guest tub dose not get hot water. I have hot water at the sink. And the cold water at the tub has low pressure. Everything was working OK the other day. Checked the valve at the washing machine,which is right next to the guest bath. That seems to be OK. What could the problem be?

View more questions Search