 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane xe 80 22 CODE
I have a trane xe 80 furnace and the ignitor does not always work or turn red. Both blowers are working but the ignitor will work only 30% of the time. When the ignitor works the furnace will continue to work all day no problem. Is this a sign of a bad control board? How can I test the control board to see if it need to be replaced? The thermostat was replaced 6 months ago and the ignitor was test yesterday with no problem found.
Thanks... Derrick |
||||
Check out some similar questions!
Trane XV-90 Fault Code of 3
[ 0 Answers ]
I went to start furnace and get fault code of 3 blinks any ideas the electrical diagram with fault codes is missing from the access panel
Trane xv90 troubleshooting? MY trane xv90 is givving me a three blinking red code
[ 0 Answers ]
Not sure what it is I think it says pressure switch problem> can this be fixed easy
Trane Furnace, code 8
[ 1 Answers ]
What is the problem with a xv90, code 8
Trane xc-95 error code 90
[ 1 Answers ]
Am getting an Error Code 90 from my TRANE XC-95 on my TCONT900AC43UA thermostat. What causes this error code to appear and how do I reset the thermostat to clear the error?
Trane xr80 no code
[ 1 Answers ]
Trane xr80 is blowing cold air. When first turned on, it flashed a red light once and then the light goes off.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
