Ask Experts Questions for FREE Help !
Ask
    steevots's Avatar
    steevots Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 12, 2010, 03:26 PM
    Trane xv90 troubleshooting? MY trane xv90 is givving me a three blinking red code
    Not sure what it is I think it says pressure switch problem> can this be fixed easy

Check out some similar questions!

Trane furnace troubleshooting - XV90 error code? [ 4 Answers ]

My XV90 upflow furnace gives a 9 red flash code when it starts up. My installers guide says it is an "Open Inducer Limit switcch". The furnace works OK, should I be worried about this?

Trane XV90 - Red Led Lite Port fm Data - 1 Flash every 20 seconds [ 0 Answers ]

Trane XV90 - Red Led Lite Port fm Data - 1 Flash every 20 seconds Green Led - steady flash every second Problem: The unit is no coming on, the condenser is running, the thermostat is set at Cool 75 degrees, and is registering 86 degrees in the house; the '*' indicator is...

Trane xv90 troubleshoot [ 1 Answers ]

Can you tell me if I can reliably replace the existing but faulty CNT 03777 integrated furnace control with the next version (CNT 04985), or should I spend twice as much on the current version (CNT 05160)? Thanks

Trane xv90 leaking [ 1 Answers ]

I have a 2 year old Trane XV90 furnace. Here is my problem: Yesterday the AC was on while we were at work. The AC unit appears to be working fine but what I noticed is there was no air movement out of the ducts. I went down to check on the furnace blower only to find a puddle of water under my...

TRANE XV90 error code? [ 4 Answers ]

The owners manual does not have a list of error codes for reference. The unit does not actually display a code (no pause), the light consistently blinks. I have never noticed this before, is this normal or something that should be looked into. Thanks!

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.