Check out some similar questions!
Kenmore washer 70 series humming at spin cycle - won't spin
[ 4 Answers ]
RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.
Washer machine will not complete entire cycle. It gets to the spin cycle, and stops.
[ 1 Answers ]
I have a GE washer, (about 5 years old). The washer goes through the wash and rinse cycles fine. When it gets to the spin cycle, it stops. I can override and manually place the machine on spin. How can I fix this problem so the cycle runs through completely. Thank You
Kenmore automatic washer will not complete cycle
[ 3 Answers ]
I have a kenmore automatic washer (110.26722690) that will fill with water and go through the agitate cycle and then stop. We have tried every part of the cycle but it still will not start and will not drain. I have manually taken the water out and the and if you start a new cycle it will fill up...
GE Washer won't complete spin cycle
[ 1 Answers ]
I bought my washer used. It works fine, until it gets to the spin cycle. It starts to drain, and after a few minutes it will begin to spin and stops. However, if it has no clothes in the tub, it will complete the spin cycle. Once in a while, it will complete the cycle with clothes in it, but it is...
Kenmore Washer Won't Complete Spin Cycle
[ 0 Answers ]
Hi, I have a Kenmore 110.4549290 that will agitate, and even will spin up to and including the start of the rinse cycle. It then drains the first rinse water, puts in a couple cups of water, but does not go into the rest of the spin cycle. The timer can be heard running (quietly), and it shuts... View more questions Search
Add your answer here.
|