Ask Experts Questions for FREE Help !
Ask
    DKB3368's Avatar
    DKB3368 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2008, 06:23 PM
    Kenmore automatic washer will not complete cycle
    I have a kenmore automatic washer (110.26722690) that will fill with water and go through the agitate cycle and then stop. We have tried every part of the cycle but it still will not start and will not drain. I have manually taken the water out and the and if you start a new cycle it will fill up again and go through the agitate cycle and stop. Any help would be greatly appreciated since I am short on cash and would like to fix this myself
    Thanks.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 5, 2008, 08:02 PM
    Does it always stop at the same spot in the cycle, like 10 minutes into the wash? It could be a bad timer and there's not much you can do other than replace the timer.
    curlyelp's Avatar
    curlyelp Posts: 1, Reputation: 0
    New Member
    		  
    #3

    Feb 21, 2008, 09:56 AM
    Did you try a new timer control? Did you try a new transmission?

    Thanks

    RM
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Feb 21, 2008, 10:52 AM
    As ballenger ask, does it always stop at the same place in the cycle?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Automatic Washer with CALYPSO Wash Motion [ 5 Answers ]

I purchased my washer in March 2002. It is displaying an error message "FL" and occasionally a "Ld" message. It is filling with water but will not go through the wash cycle and empty the water. I have been told that there may be a recall on this machine. Does anyone know how I can find out or fix...

Kenmore washer will not go into spin cycle [ 1 Answers ]

My Kenmore washer will no longer go into spin cycle not a new model but has been faithfull up to now

GE Washer won't complete spin cycle [ 1 Answers ]

I bought my washer used. It works fine, until it gets to the spin cycle. It starts to drain, and after a few minutes it will begin to spin and stops. However, if it has no clothes in the tub, it will complete the spin cycle. Once in a while, it will complete the cycle with clothes in it, but it is...

Spin cycle on Kenmore washer [ 1 Answers ]

There is a broken switch on the underside of my Kenmore washer preventing the spin cycle from working. How hard is this going to be to fix?

Kenmore Washer Won't Complete Spin Cycle [ 0 Answers ]

Hi, I have a Kenmore 110.4549290 that will agitate, and even will spin up to and including the start of the rinse cycle. It then drains the first rinse water, puts in a couple cups of water, but does not go into the rest of the spin cycle. The timer can be heard running (quietly), and it shuts...

View more questions Search