Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can you ground an outlet by wrapping a wire around a galvanized pipe that is attached
[ 3 Answers ]
Can you ground an outlet by wrapping a wire around a galvanized pipe that is attached to plastic pipe under the house, or does the pipe have to be in the ground ?
Ground on Outlet w/ Minimal or No Wall Damage
[ 22 Answers ]
Hello, I have two prong outlets in my home (built around 1946). I have two outlets in the bedroom that need to be grounded. I have grounded a few other outlets in the house by running wire to a cold water pipe and a ground rod I installed. When I grounding those outlets, I ended up with quite...
Diy install ground wire for 3 prong outlet
[ 1 Answers ]
I just moved to the dominican republic... my 2nd floor apartment has your typical 3 prong outlets... but no ground!(?). I hear this is normal down here. The apartment is make of cement blocks. Usually they build the walls then break them to install the wiring before cementing it flat. ...
250v outlet ground wire
[ 1 Answers ]
Hello, I recently purchased a house built in 1948. When I attempted to install my dryer, I realized the outlet was 3 prong 250v. A helpful post said that I could convert this outlet to 3 prong 240v. I have looked a little closer in the outlet and noticed there are two hots (red and black...
Connecting ground to 220v 3-wire outlet
[ 8 Answers ]
I am trying to connect my bandsaw to an old-style 3-wire 220v dryer outlet (2 hot wires, 1 neutral). My bandsaw has no neutral wire. Do I connect the ground from the machine to the neutral socket? View more questions Search
|