Ask Experts Questions for FREE Help !
Ask
    Mike_d513's Avatar
    Mike_d513 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2011, 07:11 PM
    Goodman Furnace won't ignite
    The unit itself is about 3 years old. Been acting up the last couple of days with random resetting. The circuit board has a single steady LED flash. The igniter glows bright red and I sanded the sensor, no flame. Any advice would be helpful.
    Mike_d513's Avatar
    Mike_d513 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 4, 2011, 07:21 PM
    Think I fixed the problem, the hose from the blower seems to not have been put on all the way. At least it lit and I hope this is the solution.

    Maybe this will help someone else out with the same problem
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace won't ignite [ 2 Answers ]

Ok I have a Goodman model GDS8 furnace that won't ignite . The induced draft blower comes on the igniter gets hot , but I don't hear gas coming out and thus no flame achieved . Any ideas??

Goodman furnace not ignite [ 4 Answers ]

Hi. PG&E service man checkout my Goodman furnace said the Glow Coil need to replace. Like to find out where is the Glow Coil located and how does it looks like? Please let me know like to get the part to replace the Glow Coil. Thank You.

Cannot get my goodman furnace to ignite [ 1 Answers ]

Help

Goodman furnace won't ignite [ 5 Answers ]

I have a Goodman 100-3 furnace. When I turn on the thermostat, the draft inducer motor starts and continues to run but the burner isn't lighting and the led has a steady blink. I have checked the rubber hose to the pressure switch as well as both inlets and all are clear. The filter is new. Any...

Goodman furnace will not ignite [ 3 Answers ]

I have a Goodman GMPN080-4 Rev 4 furnace and it will not ignite. I believe the, not sure about the tech term, flat bar that turns red hot like a stove coil has gone bad (it does nothing). I see a red LED light on the computer type panel blink 3 quick, 2 sec pause, 3 quick, 2 sec pause and so on....

View more questions Search