Ask Experts Questions for FREE Help !
Ask
    buffalobillzfan's Avatar
    buffalobillzfan Posts: 1, Reputation: 1
    New Member
     
    #1

    May 7, 2008, 03:58 PM
    Cannot get my goodman furnace to ignite
    Help
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
     
    #2

    May 7, 2008, 05:49 PM
    Well, What is it doing? We need a few more details, does anything come on?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman GUPI100-4 will not ignite [ 13 Answers ]

I have a Goodman GUPI100-4 furnace that won't ignite and both, the inducer fan and blower motor are running when powered on. I have tried the following to correct the problem - replaced ignitor assembly, replaced pressure switch, removed inducer fan to replace dry-rotted gasket with high-temp...

Goodman furnace won't ignite [ 5 Answers ]

I have a Goodman 100-3 furnace. When I turn on the thermostat, the draft inducer motor starts and continues to run but the burner isn't lighting and the led has a steady blink. I have checked the rubber hose to the pressure switch as well as both inlets and all are clear. The filter is new. Any...

Goodman furnace will not ignite [ 3 Answers ]

I have a Goodman GMPN080-4 Rev 4 furnace and it will not ignite. I believe the, not sure about the tech term, flat bar that turns red hot like a stove coil has gone bad (it does nothing). I see a red LED light on the computer type panel blink 3 quick, 2 sec pause, 3 quick, 2 sec pause and so on....

Goodman GMP125-4 starts up but does not ignite [ 3 Answers ]

I have a Janitrol / Goodman GMP125-4 gas furnace. Two years ago we replaced the motor, capacitor and the venter blower assembly. Last year (Nov 2006) we replaced the thermostat with a Honeywell programmable thermostat and then followed that with replacing the original integrated circuit module...

Goodman furnace will not ignite [ 3 Answers ]

:confused: I just bought this goodman furnace Followed the directions to convert it to lp gas. Put it on so the heat will kick on. The blower blows and the ignitor glows but doesn't ignite the flame. Now I lit it with a torch it lights but it is a horrible yellow flame. Does anybody have any...


View more questions Search