Ask Experts Questions for FREE Help !
Ask
    mickensal's Avatar
    mickensal Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2010, 02:58 PM
    Rodeo won't start
    Have 2001 rodeo timing belt broke had it changed and valves as well as heads done but still just turn don't start fuel pump is new as well as battery any help
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 29, 2010, 05:45 PM

    Perform tests in the link below:

    https://www.askmehelpdesk.com/cars-t...ml#post2123675
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Saturn won't start, power locks won't work, radio resets itself. [ 4 Answers ]

My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I...

Dishwasher won't start, water in bottom, won't turn on at all, lights don't go on, [ 0 Answers ]

Dishwasher is a kenmore ultra wash, won't turn on, stopped before cycle was finished, water in bottom, can't get it to turn on to drain, no lights no nothing, have tried other plugs,nothing

Changed starter on my 98 grand am now it won't start.cranks over but won't start [ 2 Answers ]

I changed the starter on my 98 grand m with the 2.4 engine .now it won't start. Check all the fuses seems to be in order but won't fire up just cranks over

2009 snowblower.won't start w/elec.start.the rope pull won't reciol. What do I do [ 2 Answers ]

Have 1 yr. old sears snowblower.oil good,gas full.rope is stuck,won't recoil,have it hanging on handle.tried elec.start.sounds like it wants to start but won't.is it because rope pull won't coil back into place or something else.under warranty but I have to bring it to sears.no truck.please...

Kenmore he4 panel won't work and dryer won't start [ 1 Answers ]

I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...

View more questions Search