Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Snowblower won't start, made bad noise using electric, pull cord now hard to pull.
[ 7 Answers ]
I tried to start my snowblower today and it wouldn't start. I decided to try the electric start, plugged it in, hit the start button and all it made was a spinny grinding noise. Unplugged it, and tried to start it manually with pull cord again. The cord would not pull without lots of effort and...
1997 honda civic dx won't crank won't start
[ 17 Answers ]
I have a 1997 honda civic dx 5 speed. Yesterday car was fine, started strong and drove strong. I parked car last night and about 4-5 hours later tried to start it. When I turned the key in the ignition there was no crank at all. I can hear a little hum and then a click but that's all.
Saturn won't start, power locks won't work, radio resets itself.
[ 4 Answers ]
My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I...
Can't start my Poulan chainsaw. Start rope too hard to pull.
[ 1 Answers ]
Can't start my chainsaw because the start rope is too hard to pull out. Pulling the rope causes a jerky action.
Kenmore he4 panel won't work and dryer won't start
[ 1 Answers ]
I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons... View more questions Search
|