|
|
|
|
New Member
|
|
Aug 8, 2007, 01:48 PM
|
|
Saturn won't start, power locks won't work, radio resets itself.
My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I didn't have it repaired right away due to $.. then it stopped doing it. Well, 3 months passed with no problem at all and it did it again. But this time the power locks won't work and the radio resets (can't see screen with time or station, can't change station, staticy sounds). But the power windows work, the lights work, the air works... But there is nothing, not even a click when we turn the key. We tried tapping the starter and it didn't work. But after letting it sit for a while, it started again and haven't had a problem again.. yet. HELP! WHAT THE HECK IS THIS? DO I NEED A NEW STARTER? I had it to a mechanic but because it didn't do it while in his presence, he couldn't pinpoint the problem. I thought if it was just a starter issue, it wouldn't mess with the power locks and radio (or electrical system). Any guesses?:confused:
|
|
|
Ultra Member
|
|
Aug 8, 2007, 01:54 PM
|
|
I have also been having problems with my 00 saturn SL2. My power locks stopped working when the car is put in park or drive (they used to lock when put in drive and unlock when put in park)... and now sometimes when the key is taken from the ignition, the air will still run... my blinkers also are on the fritz. I haven't been able to figure it out either... wierd cars... let me know if you find out anything.
|
|
|
Uber Member
|
|
Aug 8, 2007, 02:36 PM
|
|
. Check all under-dash and under-hood fuses with a test light or multimeter. Here's how:
https://www.askmehelpdesk.com/cars-t...tml#post252145
. Clean battery cable and terminal connections.
. Check fluid level in the battery and ensure it's fully charged.
. Clean connections going to the starter motor and starter solenoid, making sure to disconnect the negative battery cable first.
. Check for any codes--AutoZone will do this for free.
. Read the link below:
https://www.askmehelpdesk.com/cars-t...tml#post235560
If, after all of the above is done, the starter motor doesn't crank consistently, replace the starter motor. AutoZone will also test starter motors for free.
|
|
|
Junior Member
|
|
Jun 24, 2008, 01:27 PM
|
|
I have a car like this at my shop. I am thinking the starter needs to be replaced, but I also read something about the ignition swithc failing, causing power loss to some of the cars components. I think that the ign switch is failing, causing not enough power to go to certain acc's, such as windows, locks, raido, starter etc..
But def have everythign checked out first.
|
|
|
New Member
|
|
Mar 20, 2011, 05:08 PM
|
|
This car is pissing me off, I have the same car with the same problems, I have changed the battery terminals and bought a new battery. Also replaced the stater, and the ign. Switch. Still nothing... Someone, anyone please help me out... I just want my car to start...
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
93 Civic won't start, turns over but won't crank
[ 4 Answers ]
I have a 1993 honda del sol SI that I converted to manual, before the swap everything was fine, cranked up, my battery and alterntor were going bad but would crank up, after the swap, it turns over but nothing happens,I'm not gettting any spark at all, I went and got a new distributor but still...
Car won't start, no click and no power to radio, power window or locks
[ 6 Answers ]
After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...
Kenmore he4 panel won't work and dryer won't start
[ 1 Answers ]
I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...
Furnace motor has power but won't start
[ 2 Answers ]
My furnace motor will not start, however if I give it a gentle turn by hand (via the fan), it starts right up and runs fine. Is the is capacitor or a switch problem in the motor?
Thanks...
View more questions
Search
|