 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Burners lighting occasionally
My furnace starts up fine with the inducer motor followed by ignitor then the release of gas, however only sometimes will the burners light. If I blow on the burners at the time of gas release then they light. Why do I have this lack of oxygen? Could it be a heat exchanger issue? Any help would be great thanks.
|
||||
Check out some similar questions!
Hello! I have an Amana High Efficiency 80 SSE series Furnace. My problem is Burners are not lighting. On the Control Board I have a diagnostic light that is giving me a single flash, which according to the guide on the front of the controler says to lock-out, and inspect fan. I have pulled off the...
I have a goodman furnace, that has a automatic ignitor sysytem. The burners are not lighting. When I turn it on, it glows red but the burners never kick on, then the glow goes down, shuts itself off.
I'm a tech w/certification but little field experience. I have central a/c condensing unit that hasn't been in use for 2 years. No refrigerant in system so I partially charged it. Replaced capacitor. Tested contactor and compressor terminals (got readings of about 1, 3, and 4) and both good. ...
I have a carrier natural gas furnace, model no. 58es080-30. The pilot light ignites, then you can hear a clicking noise, after about 15-20 seconds the blower fan starts up but the main burners are not lit. The furnace has acted like it's been having trouble igniting in the past few weeks, seems...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
