Ask Experts Questions for FREE Help !
Ask
    PLanders's Avatar
    PLanders Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2008, 02:24 AM
    Burners not lighting
    I have a goodman furnace, that has a automatic ignitor sysytem. The burners are not lighting. When I turn it on, it glows red but the burners never kick on, then the glow goes down, shuts itself off.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Nov 1, 2008, 07:30 AM

    Gas valve could be bad or something preventing it from coming on.if you have a tester you could check for low voltage power going to the gas valve at the time it is trying to start up. If there is power going to it and its not opening up/then make sure you do have gas for sure,sometimes a cut-off valve will get turned off and forgotten about
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Burners come on, go off, come on, then they go away [ 3 Answers ]

Hi folks. I've got a problem with a Goodman GPG13 gas pack unit. When a call to heat is given all seems to work fine but the burners come on for a short time then some go off and come back on but after a while (a couple minutes) they all go off. And they stay off for the lock out time ~ I'm...

Why do the burners go out before the fan even comes on? [ 2 Answers ]

The furnace ignites quickly with a blue flame and burns for approximately 2 minutes. Then the whole unit stops silent for about a second. Then the fan finally comes on after all of this and blows somewhat hot air for approximately 3 minutes. The entire cycle is 2 minutes of burners, then 3...

Burners do not stay lit. [ 3 Answers ]

Burners do not stay lit. I have a brand new Goodman GPG13 package unit with a 138,000 BTU natural gas furnace. The furnace has six (6) burners and an electronic spark ignition. All burners light, then (after about one (1) minute) the bottom burner or bottom two burners sputter or just go out may...

Main burners on my carrier furnace not lighting [ 1 Answers ]

I have a carrier natural gas furnace, model no. 58es080-30. The pilot light ignites, then you can hear a clicking noise, after about 15-20 seconds the blower fan starts up but the main burners are not lit. The furnace has acted like it's been having trouble igniting in the past few weeks, seems...

Burners won't stay lit [ 2 Answers ]

-- need more help in figuring out flame sensor or roll out switch - Weather King --- ICECO --- 80 PJ --- forced air --- Honeywell valve (on/off switch)---burners light for 1 or 2 seconds, then go out

View more questions Search