Ask Experts Questions for FREE Help !
Ask
    mmjnm's Avatar
    mmjnm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2010, 04:55 PM
    Where is the reset button on my janitrol furnace model gmp075-3
    Where is the reset button on my janitrol furnace model gmp075-3
    Dennis1523's Avatar
    Dennis1523 Posts: 54, Reputation: 2
    Junior Member
    		  
    #2

    Dec 18, 2010, 05:21 PM
    There is not one on that unit. There is a roll out switch but it is not manually resettable. Also a door switch. Here is a site you can check out and find your parts. http://www.searspartsdirect.com/partsdirect/part-model/Janitrol-Parts/Furnace-Parts/Model-GMP0753/1771/0912130?searchedModel=gmp075-3&blt=05
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #3

    Dec 18, 2010, 06:13 PM
    Turn the power to the furnace off and then back on--- That will reset the conrol board but not any manual reset limits.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Location of reset on janitrol furnace [ 4 Answers ]

We are getting colder... please recommend places to look for a reset button on janitrol furnace. Any help would be appreciated.

Where is the reset button and/or model number [ 1 Answers ]

I live in a mobile home with a Coleman Evcon A/C the night before last we had a bad storm and the electricity went off a few times. It was cool enough that I did not even notice it wasn't working until yesterday afternoon. I have checked the breaker and that is not it. I had a similar furnace/AC...

Where is the reset button on my furnace [ 1 Answers ]

a/c or heat won't come on and neither will the fan on the thermostat

Gas furnace problem Goodman model# GMP075-3 revb [ 20 Answers ]

When it starts up everything appears normal, the induced draft fan starts for about 30 seconds, the glow plug gets red hot, the gas ignites, about 30 seconds later the main blower wheel spins. The hot air comes out of the registers and everything works great but only for about 5 minutes, then for...

Where do I find a reset button for Janitrol Model GMP100-4 [ 1 Answers ]

My furnace is out and this has happened before... it just needed to be reset. I need help locating the reset button on Janitrol model GMP100-4, serial #9403029893... can anyone help? Where is a reset button usually located on a furnace?

View more questions Search