Ask Experts Questions for FREE Help !
Ask
    m_mckinley's Avatar
    m_mckinley Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 18, 2010, 07:59 AM
    Where is the reset button and/or model number
    I live in a mobile home with a Coleman Evcon A/C the night before last we had a bad storm and the electricity went off a few times. It was cool enough that I did not even notice it wasn't working until yesterday afternoon. I have checked the breaker and that is not it. I had a similar furnace/AC in another mobile home, same thing happened a couple of times and then a repairman showed me where the reset button was. How can I find the reset button or even the model number.
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #2

    Sep 18, 2010, 09:06 PM

    I don't think a reset button is your answer here. One winter my furnace would not come on after a power outage. It was the contactor that went bad. You have to figure that after any kind of power outage there probably was a bit of a surge before the actual outage that fried whatever low wattage component in your a/c unit. Happens all the time after power outages. I had my central a/c in Florida do the same thing after a storm with a power outage. It was usually the relay switch that went. After one particularly nasty storm in the summer the entire a/c unit had to be replaced due to the unit being "fried" by the spike in electricity. The key to answering your question was the fact that the electricity went off and on at which time an electrical spike went through your system.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where is the reset button on a rheem heat pump, PPL-JAZ Model Series 14 SEER? [ 1 Answers ]

I have Rheem Heat Pump and it's not working. The fan is blowing, but no cold air. I can't find the reset button on it. It's a PPL-JAZ Model Series 14 SEER, and it was put in just over two years ago. I have looked at installation instructions, but I can't find the reset button. Can anyone help...

Where is the reset button on my a/c? [ 1 Answers ]

The thermostat was changed and he didn't turn it off first. It is a kenmore a/c, can anyone tell me where to look for the reset button?

Reset button [ 1 Answers ]

I was replacing the front cover and touched a wire and got a spark then the air or heater fan would not work the unit is a carrier without a pilot light it has the glow light I am trying to find the reset button please help

Where do I find a reset button for Janitrol Model GMP100-4 [ 1 Answers ]

My furnace is out and this has happened before... it just needed to be reset. I need help locating the reset button on Janitrol model GMP100-4, serial #9403029893... can anyone help? Where is a reset button usually located on a furnace?

Reset button keeps needing to be reset [ 2 Answers ]

The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes.


View more questions Search