 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ritetemp 6030 wiring setup
I have a lennox system with aux heat. My old thermostat had the following diagram layout g c r w1 y l w2 e b o I have a six wire system and the ritetemp 6030 only lists a 5 wire so I was wondering what the setup would be on the new 6030 thermo with the diagram of c b o w2 w y y2 rh rc g a any help would be appreciated
|
||||
Check out some similar questions!
I have a 6030 ritetemp thermostat, 7 day programmable with an energy star approved program. I have tried the 7 day program & custom program. Seems that there is a communication problem in the thermostat. The thermostat will work if it is manual turned on. Why won't the other problems work?
Replacing maple chase thermostat with ritetemp thermostat model # 6030
I have a carrier ac unit with gas heat. I am trying to wire in a ritetemp 6030 thermostat. Now I have a blue/common wire for my 24v,along with the other red, white, green, and yellow. When I hook it up my ac shows a code of solid red which indicates (control has 24vac) yet I do not get any ac...
Ok, we have baseboard hot water running off a natural gas furnace controlled by an old thermostat. We also have a heat pump/AC unit that we use for AC in the summer and only as an emergency source of heat in the winter (typically not used at all) that also runs off a mercury based thermostat. ...
Now that I have removed the switch cover, I am now attempting to remove the wiring and put the new thermostat (ritetemp 6030). The problem is that I have 6 wires coming from the wall and the instructions don't have a 6 wire heat/pump - aux heat wiring schematic. The show a 5 wire schematic but...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
