Ask Experts Questions for FREE Help !
Ask
    jrromo's Avatar
    jrromo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 31, 2010, 09:29 PM
    I have a carrier ac with gas heat and am trying to wire in a ritetemp 6030 thermostat
    I have a carrier ac unit with gas heat. I am trying to wire in a ritetemp 6030 thermostat. Now I have a blue/common wire for my 24v,along with the other red, white, green, and yellow. When I hook it up my ac shows a code of solid red which indicates (control has 24vac) yet I do not get any ac coming on. I get heat but no ac. I have jumpers on my 2 and 5 positions. What seems to be the problem? Now if I take a paper clip and touch my y to rc the ac comes on. Could it be I have a faulty thermostat?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Mar 31, 2010, 10:05 PM

    Is Rc jumped to Rh?

    Does FAN only mode work?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat 6030 ritetemp [ 2 Answers ]

I have a 6030 ritetemp thermostat, 7 day programmable with an energy star approved program. I have tried the 7 day program & custom program. Seems that there is a communication problem in the thermostat. The thermostat will work if it is manual turned on. Why won't the other problems work?

Installing Ritetemp 6030 [ 0 Answers ]

Ok, we have baseboard hot water running off a natural gas furnace controlled by an old thermostat. We also have a heat pump/AC unit that we use for AC in the summer and only as an emergency source of heat in the winter (typically not used at all) that also runs off a mercury based thermostat. ...

Thermostat connection Totaline to RiteTemp on Heat Pump [ 4 Answers ]

I have a Totaline CR100 - a non programmable tstat. I want to replace it with a Ritetemp 6080 tstat - programmable. My home has a heat pump - both cool and heat are derived from the one pad mounted compressor outside my home. There are 5 wires coming from my wall and are connected to the...

Wiring schematic for ritetemp 6030 [ 9 Answers ]

Now that I have removed the switch cover, I am now attempting to remove the wiring and put the new thermostat (ritetemp 6030). The problem is that I have 6 wires coming from the wall and the instructions don't have a 6 wire heat/pump - aux heat wiring schematic. The show a 5 wire schematic but...

View more questions Search