 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Weil-mclain furnace problems
"I have a weil-mclain furnace and the red light is blinking. I try holding it down for 65seconds then it turns back on. I see the flame come on and I can hear the furance turning on but then a few seconds later it turns off again. Its about 20 years old. Any suggestions?"
|
||||
Check out some similar questions!
I have power to my boiler because the fan is running, but no power to the electronics. So no firing, no sensing and no heat. Are there fuses in there that could be blown? Unit is 2 years old.
I have a Ultra 155 boiler with an indirect 40 gal DWH. 4 zones, plus prioritized domestic water Taco switching relay. The system uses 4 taco cartridge circulators for the four zones plus one for the DWH. It constantly goes off (at least once every other week in the winter) on a too much flow...
I'm looking for a transformer with a circuit breaker to replace a White-Rodgers 90-112 transformer/relay. I can't find the combination with a breaker so I figured I'll buy the transformer and then pop it in in the 4" X 4" backplate since the relay is not used anyway. Will the Honeywell AT150F1022...
Purchased a Weil-McLain Ultra 230 Hot Water Boiler Natural Gas about a yr ago. From basically day 1 have had lockouts. In the 30-50 range over a course of weeks. Now down to 18. Reason: Return temp exceeded the supply temp. Have had numerous visits from Weil Mclain people and people that...
My furnace burner don't want to start by imself If I push the reset buton the burner start for 45 second That it I need to keep pushing the button for burner to start What is my propleme, why do the burner don't want to start By imself?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
