 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
MY Sears H3 gas dryer gets too hot. Is there a limit switch that is failing?
When we dry clothes on a normal setting; the dryer continues to heat to a dangerous temperature and does not shut off the gas. Is there a limit switch that has failed or is there some other problem? We are forced to use a gentle cycle which takes a long time with regular clothes.
|
||||
Check out some similar questions!
tableclocks again... I found the limit switch... can I junp the 2 wires to close the switch to see if this is the real proublen..? thanks Rgph 10eamer 100,000,, 80%
Replacing the high limit switch in my cloths dryer agean. The first time it had some lint build up, but and I vacuumed inside and out. 1 year later it actually burnt the lead off it. My question is other than build up what else do I need to look for that can cause bad air flow.
Fraser johnson intermittingly kicking high limit switch,code flashes 4 times on board,it never has any other codes,replaced limit switch,still same problem
My gas furnace doesn't fire-up although I hear clicking inside every time I attempt to toggle the switch bypassing the thermostat. Is it SAFE to short the LIMIT SWITCH to check it that's the problem. Because I remember the furnace was left for several hours running and then all of a sudden it just...
Hello I have a sears kenmore 90 series gas dryer. And I was wondering if it has the same kind of fuses as an electric dryer? Because everything seems to work but it does not heat. And I would like to know if it has the same fuses as an electric dryer?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
