How to check a gas furnace limit switch

tableclocks Posts: 432, Reputation: 2

Full Member

Sep 19, 2010, 10:46 AM

How to check a gas furnace limit switch

tableclocks again... I found the limit switch... can I junp the 2 wires to close the switch to see if this is the real proublen..? thanks
Rgph 10eamer 100,000,, 80%

Check out some similar questions!

Gas furnace high limit switch burns out mfg no. Sugk 100ah02 [ 2 Answers ]

1983 gas furnace. Had to replace the limit switch 4 times in past 5 years. Some of the flames change from blue to yellow after the blower kicks on. I suspect leaky heat exchanger. Should I replace the exchanger? Model No. 867.769234; Mfg. No. SUGK100AH02. Can I do it myself?

What function doesa limit switch has on a colman gas furnace [ 1 Answers ]

The board gives me a code of four flashes and icode said that iy is a limit switch

Open limit switch on Concord Gas Furnace [ 14 Answers ]

I have a Concord 80 Plus Gas Furnace. I am starting the furnace for the winter and it gives me a LED code of open limit switch or limit switch circuit. Everything seems to work fine up until the point where the blower needs to turn on. I had the same problem last year but got a tech to fix it. I am...

Hi-limit switch failure on Amana gas furnace model 80SSE [ 0 Answers ]

Four blinks says reset hi-limit switch. Could not reset stuck button so I replaced it. Still blinks four times. What can I try next?

Gas Furnace Limit Switch (Testing) [ 2 Answers ]

My gas furnace doesn't fire-up although I hear clicking inside every time I attempt to toggle the switch bypassing the thermostat. Is it SAFE to short the LIMIT SWITCH to check it that's the problem. Because I remember the furnace was left for several hours running and then all of a sudden it just...

View more questions Search

Check out some similar questions!

Add your answer here.