Ask Experts Questions for FREE Help !
Ask
    idoitmyself's Avatar
    idoitmyself Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 30, 2010, 05:29 PM
    Cloths dryer high limit switch
    Replacing the high limit switch in my cloths dryer agean.
    The first time it had some lint build up, but and I vacuumed inside and out. 1 year later it actually burnt the lead off it.
    My question is other than build up what else do I need to look for that can cause bad air flow.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jan 31, 2010, 08:29 AM

    If it burnt the lead off, it may have been a loose connection.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where is the high limit switch located on a Trane XR80 furnace [ 1 Answers ]

I was told by a Trane technician that either my high limit switch or the fan relay was causing my problems. The relay is on the control board, but where is the high limit switch

High limit switch trip at 170 C [ 3 Answers ]

Hi I have a furnace that trip at 170 degree Celsius.. When thi shappen the room in which the thermostat is ,is only 65.what is the problem?The furnace works for 10-14 minutes and then the high limit switch or rull out swtich trip. Do you know what the cause is? Thanks

White-Rogers high limit switch [ 1 Answers ]

I have a model 50a50 241 White-Rogers control board that flashes 4 times, which on the control board says " open high limit switch". How do I do that or should I call a furnace repair person. I have checked online with White-Rogers and they only give info on their newer replacement versions of my...

Trane xe 80 open high temperature limit switch [ 1 Answers ]

Furnace is about 13 years old... we just replaced the ignighter in it last night because it was running through all the steps to run except ignighting. It fired right up and ran for about 7-8 hours... now it won't ignite at all (it is running through all the steps it needs to except for...

High limit switch [ 2 Answers ]

Im replacing my limit switch which is located in the heat exchanger. What does a high limit switch actually do? Thanks.

View more questions Search