 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Outdoor thermostat on compressor/condenser unit.
I have a Goodman MDL# GSH 130301AC condenser unit; with a (gas) Backup Heat Control. When I call for heat the Heat pump will not come on, however the back up heat fires off if the inside thermostat has a 5 degree diff or if I go to Emerg heat. A friend thinks it's the outside thermostat sensor; I do not see one on the condenser unit. Also the circuit board on my furnace has no wires attached to the Outside sensor contacts? Is it possible the unit does not have an outside sensor? I have a White-rodgers thermostat. Any suggestions
|
||||
Check out some similar questions!
HI, This relates to the outside carrier heat pump unit. Symptoms are: the unit is receiving the signal to turn on from the inside thermostat. The contactor clicks closed (audible). There is a humming sound. I think in is the compressor. The large fan on the outside unit does not rotate. I...
have a Heat pump with A/c. We are changing the indoor air handler to a gas unit. Can the outdoor condensing unit be used with a new coil in this system?
I put in new motor wires was already pulled where do they go please help
My out door compressor unit stopped working suddenly. It sounds like something is running but the fan isn't turning on. I have tried replacing the fuses but it didn't help.
I've got a problem I need help with. I just installed a condensing unit outside for my air. It was empty when I got it. No refridgerant. When I start the unit the fan and all comes on but the compressor does not. This is a duroguard 2.5 ton unit. I have tried to boost it and still no luck. The unit...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
