 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier central heat won't turn on?
My carrier has the old honeywell thermostat. The gas heat fires up but no hot air is being blown ibto the house. If I turn on the fan manually. It blows cool air into the house which I presume bypasses the heater. What is the problem?
|
||||
Check out some similar questions!
I just noticed that when my furnace comes on to heat the house, the outside central AC compressor fan comes on. I thought that the central AC compressor was not used while the furnace provides heat, just the air handler is the same? Can anyone advise whether this is true?
I have an older Goodman air handler and the central heat won't turn off even when it exceeds the set temp, it will run and run until I turn off the thermostat. The a/c works fine. Any help here? I cvhanged the thermostat and still had the problem. Spoke to a friend who said it may be the sequencer...
a/c works fine. Heat will not turn. Replaced t-stat still the same. Contactors all seem to work when 24v is applied. Condenser cycles. It is a trane heat pump. Thanks for your help
The system continues to run even when in the "off" position, no matter if it's set on heat or cool, and no matter how or low I turn the thermostat. I have the thermostat set on "off" now, and the fan continues to run; it's set on auto. There is no off position for the fan, only for the heat/cool...
My central heat won't kick out any heat. The blower works and the little fan inside kicks on but when you turn on the thermostat the ignitor won't come on to send a signal to turn on the gas. The heater is a day and night high efficiency model.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
