Check out some similar questions!
How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced
[ 2 Answers ]
Just a quick question.
Boiler on and off after thermostat replaced
[ 4 Answers ]
After replacing the thermostat, I raised the temp setting to check that it was working. Seems to work but once temp is reached, the boiler start to shut on and off every few seconds. I let this run for a few minutes to see if it would stop, but after a while I just reduced the temp setting to...
Replaced Thermostat and A/C will not kick on
[ 5 Answers ]
I am attempting to replace a Totaline thermostat with a Honeywell RTH6300B programmable thermostat. I have both Carrier A/C and gas furnaces for both zones (2). The units are all 3 years old. After replacing the thermostat on the first zone, I can only get the heat to kick on and it...
Replaced Thermostat No Heat
[ 3 Answers ]
I had a friend replace my old thermostat with a new LUXPRO PDS 100 this summer and I had problems with my Frigidaire central air / heating system to work. At first it would not blow cool air and he came back and switched wire around. It work on cool fine for the last month and a half, but I now...
No power after thermostat replaced
[ 3 Answers ]
Ok... I know better... but since I was dealing with low voltage... I figured no harm... WRONG! :eek: I should have turned off the breaker when replacing my thermostat... enough said. I replaced my thermostat (simple comfort 3001) with a honeywell RTH6300b because the simple comfort display was... View more questions Search
Add your answer here.
|