Ask Experts Questions for FREE Help !
Ask
    ernit55's Avatar
    ernit55 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 30, 2010, 12:24 PM
    w-32 wall control
    The light button works on the w-32 but when I push the fan button the light goes off and the fan no longer works?
    Is the issue with the wall control (that has been replaced twice) or is it the fan?
    TriplettZ's Avatar
    TriplettZ Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Nov 5, 2010, 08:06 AM
    Seeing as how the W-32 wall control is for Casablanca fans, which are very high quality, it is most likely that the remote control has merely gone bad, as opposed to a failure in the fan. I would suggest checking out Casablanca's website for their nearest distributor in your area, get a new W-32 (still widely available), and see if that fixes the problem. Don't forget to match the DIP switch settings from your existing controller to assure proper communication with the fan's receiver.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring for 5-speed fan control wall switch [ 3 Answers ]

I have installed a ceiling fan/light fixture, however, am not sure as how to wire the wall switch, specifically the wiring for the 5-speed fan control. I am able to get the light to work, but not the fan. Look forward to your replies. Thank you

Eliminate Remote feature/need Wall control [ 2 Answers ]

We have a new Hampton Bay REMOTE control ceiling fan to replace an old casablanca. We want to hard wire to a wall switch. Eliminating the remote altogether for a number of reasons. Is there a Wall Control specifically for Hampton Bay or do we use a generic. It obviously has to have the...

Which receptacle does wall switch control? [ 26 Answers ]

I've been in this house for 7 years and have done wiring before e.g. added fans, updated lights etc. I am replacing all the switches and receptacles right now. There is a wall switch at the entry to the living room which has never controlled any of the wall receptacles. The wall switch and...

Wall Control Remote Wiring to Two Switches [ 2 Answers ]

I have a ceiling fan wall control that I'm trying to install into a wall outlet. The home is prewired for ceiling fan.. i.e. one switch for light, one switch for fan. The wall remote is a Minka Aire brand. There are 3 wires on the remote, two black wires, one marked "fan" and the other marked...

Harbor Breeze Wall Control Kit [ 3 Answers ]

I bought a Harbor Breeze fan that came with a remote. I also bought the wall control kit WC100L (Wall Control Kit) My understanding is that the wall control is a remote that transmits to the fan (the kit includes a receiver that gets installed in the fan that gets coded similar to the remote -...

View more questions Search