Ask Experts Questions for FREE Help !
Ask
    Roken413's Avatar
    Roken413 Posts: 10, Reputation: 1
    New Member
     
    #1

    Oct 27, 2010, 05:06 AM
    Gas furnes
    Goodmen furnes won't fire up! Model # b1370145, I've replaced primary limit,rollout switch,new board,fuse,cleaned everythig. It goes through sequence glows like it wants to start and then ignighter shuts off! Both fans stay on,then it repeats. What is wrong?

Check out some similar questions!

Goodmen gas furnes [ 1 Answers ]

Furnes goes through proper secquence, it glowes like it wants to light but never do! Led indicates something's open, what could it be?

Trane xe 80 furnes trouble shooting [ 1 Answers ]

How much dose the cercuit board cost?

Flexi vs. Black iron gas line to water heater gas valve [ 3 Answers ]

I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...

Connection to gas range gas line too large for gas line intake valve [ 2 Answers ]

Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy?

Attaching properly gas flex pipe to gas pipe and gas stove [ 5 Answers ]

How do I properly attach the flex pipe to the gas stove on one end and the supply pipe on the other end? Do I need a gas poxy? If so what is the proper method of application--on both sides of the attachments (flex pipe and gas supply pipe/stove) or on just one, how much is enough? How tight do I...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.