Ask Experts Questions for FREE Help !
Ask
    Roken413's Avatar
    Roken413 Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2010, 06:41 AM
    Goodmen gas furnes
    Furnes goes through proper secquence, it glowes like it wants to light but never do! Led indicates something's open, what could it be?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Oct 26, 2010, 08:00 AM

    If it glows and does not light then it is not getting gas or power to the gas valve
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodmen a/c heatpump I get no electric to the contactor [ 3 Answers ]

I get no electric to the contactor,I have a goodmen heat pump and a/c 3ton

Goodmen flame sensor [ 1 Answers ]

When a furnace starts you hear the vent start and it keeps going to till the end of the cycle. My vent starts then stops and repeats this process while running through a cycle. The burners shooting out gas are still running when it does this. Help I don't understand what is wrong. I recently...

Trane xe 80 furnes trouble shooting [ 1 Answers ]

How much dose the cercuit board cost?

Goodmen furnace [ 8 Answers ]

Furnace starts proper operation fires 10 seconds later goes out checked pressure switch replaced pressure switch still have problem I noticed a drip comind from the bottom of the motor and I also had a bad rainstorm is it possible the pvc exhaust is full of water

Connection to gas range gas line too large for gas line intake valve [ 2 Answers ]

Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy?

View more questions Search