The thermostat says 'heat on' but nothing happened.

Check out some similar questions!

Instlld program thermostat, wrked fine heat all winter, now no heat, a/c or fan? [ 4 Answers ]

We got a Lux Programmable TX9000a. It installed it in November and heat worked fine all winter. Today I tried to turn on A/C and it didn't work (it is 90 where we live). I tried looking at wiring and perhaps a mis-wired. I am not sure. I have 5 wires and I have two units outside (heat pump and...

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Heat pump: fan does not run with fan set to 'on' position [ 3 Answers ]

I have a heat pump system and a programmable thermostat. The system runs fine, in heat or cool mode, with the fan set to 'auto'. It will not run (no fan) in heat or cool mode with the fan setting set to 'on'.

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

View more questions Search

Check out some similar questions!

Add your answer here.