 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower turns on and off burner stays lit.
"I have a Inter therm natural gas furnace. the blower turns on and off but the burner stays on. if i turn the heat up about 5 degrees higher it will stay on . but when it shuts down the blower will start and stop about every 45 seconds. this will last about 10 minutes. any help would be great"
|
||||
Check out some similar questions!
Have natural gas hot air furnace with honeywell smart valve SV9520H8067. Unit calls for heat and ignites OK but only stays lit for 5 seconds and goes out. Have had smart valve replaced 5 years ago. Does this sound like another smart valve problem?
Pilot stay's lit now but still will not fire up Cleaned pilot orifice good and now have a good flame Put old thermocouple back in And has flame almost directly on it Be cause it at least worked half Still won't fire up
My 4-5 year old rheem furnace has a problem. Everything seems fine until the burners start up. They fire up, but only stay on for about 3 to 8 seconds, then the blower turns on but only puts out cold air. I don't think it's an ignitor problem because the burner always ignites. It just started doing...
My furnace pilot stays lit continuously Even though it states inside of the furnace and I quote "Pilot will light automatically when there is a call for heat. NOTE during thermostat off cycle main burners and PILOT flame are both extinguisehd. I have gotten many rude response that say that's...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
