Ask Experts Questions for FREE Help !
Ask
    marie1955's Avatar
    marie1955 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2010, 07:15 AM
    What would cause my 13.5 hp briggs&straton to flood spark plug chamber with gas
    What would cause my 2006 13.5 hp yard machine mower to flood the spark plug chamber with gas? When I pull the plug gas pours out.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 29, 2010, 07:55 AM

    Open the carb float and test the float and needle valve. Float down allows fuelk to flow freely, raise the float and all fuel should stop flowing, does it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs 14.5 hp ohv - No spark to spark plug [ 1 Answers ]

Was mowing tall grass when it died. At first there was a small spark at the plug but now there is none. Had been having to use pickup to jump start the Huskee 38" riding mower. Where can I find a schematic for this engine. Model 287707 Type 1224-E1 Code 000531ZD

12 hp Briggs & Stratton spark plug gap setting [ 2 Answers ]

What is the spark plug gap setting on a 12 hp B&S ? This is an OLD Montgomery Ward PowerKraft rider. Probably late 70's early 80's model.

Briggs & Straton 14.5 ovh starts if I pour gas in carb but won't keep ruunning [ 2 Answers ]

I have Murray rider mower with a Briggs & Straton 14.5 OHV Engine. It does not even try to start unless I pour gas directly into carb. It appears to have good compression. If I take the breather off and pour gas directly into carb, it starts and runs long enough to use up that gas then dies. I...

Briggs & Straton Freewheeling when starting [ 1 Answers ]

While using my Troy Bilt Lawn Tractor I heard a loud pop and the engine died. When I tried to start it again, the flywheel just freewheeled with no resistance at all. The engine is a B&S Intek 18.5 HP OHV. An inspection of the engine didn't show any oil leakage or other apparent problems. I'm...

View more questions Search