 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ge washer won't spin or agitate
Belt was broken on older ge washer. Replaced belt but now, the motor will not turn on. The basket moves freely in both directions. There is a green light on the circuit board above the motor that flashes when the big pulley wheel is in a certain position. Is there a reset switch for the motor? What can you recommend?
|
||||
Check out some similar questions!
This machine is probably about 10 years old. It is a direct drive. The washer will fill and drain but when it tries to agitate or spin I hear a grinding and clicking sound coming from the bottom of the washer. I cannot turn the agitator by hand. Would this be a problem with the motor, or...
Kenmore elite model #110.23032101 will not agitate or spin. It did let the water out and we can here it running, but, sounds like something hitting inside. I can not figure out how to take the cabinet apart to get a look at it. Any help would be greatly appreciated!
My kenmore washer 417.94814301 is load and washes through the regular cycle but when it comes to the spin cycle it completely stops. I've checked the breaker switch to see if I needed to replace any fuses and unplugged and plugged it back in... nothing. Please if anyone can give me any helpful...
I have a GE washer model #SE4210. It will not spin or agitate. It will not even spin when I try to spin it manually. I removed the panel off the front and noticed black dust below the motor. Apparently the belt has been slipping and luckily I haven't burned up the motor yet. What can I do to...
It's a Kenmore heavy duty super capacity 110.26322503 1 year and 1 week old. Has been used for only 6 full months and has run good up until last night. Noticed when we took the clothes out they were still very wet. Tried to re- Run the spin and nothing. The machine hums and the lights actually...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
