 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
In April 2010 I have installed a Noma non programmable thermostat in the bathroom wit
In April 2010 I have installed a Noma non programmable thermostat in the bathroom with a heater/fan and when I put it on it works for about 2-3 minutes the numbers on the display disappears,shut the heathher,comes back by itself cause cannot stop it by pushing the buttons comes back and the heater start again.Do I need to replace the thermostat or is it simply not weel installed?if so can I get reimburse as I don`t have the cover box to return it to Canadian Tire.Any answer will be
|
||||
Check out some similar questions!
I have just moved into a new house and I have a NOMA Programmable Thermostat and no instructions on how to use it. It is locked and I cannot change the settings. I need help with instructions on how to unlock it and how to program it.
I moved into a house with a Noma programmable thermostat, there are no instructions on how to program it. I have been turning it on to heat, and up until now it has been operating fine. But tonight it won't heat above 15 degrees, it begins to cycle, then cuts out, I hit the over-ride button, but it...
I have tried to replace a conventional lever action mercury thermostat with a new digital programmable Noma thermostat. The problem is when it turns on the heat and fan works fine but when it reaches heating it shuts of but the fan stays on and will not shut off:confused:
We have programmed the thermostat and it always jumps back to another setting. Can you help.
I am changing a York thermostat to a Noma programmable. I have rewired transferring w to w, rc to rc, g to g, y to y . There is a wire jumper on the York that goes from rc to 4. There is no corresponding 4 on the Noma. Does anyone have a suggestion as to where the wire jumper should go if I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
