Ask Experts Questions for FREE Help !
Ask
    nikk1973's Avatar
    nikk1973 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2010, 11:25 AM
    Ac fan not blowing
    OK while changing my thermostat from manual to digital I had to change the circuit board in the attic furnace it looks the same but a slight difference it a goodman 5 ton 13 seer... any way. When I change the thermostat my heating work great fan blow when it on. Now its the summer I switch it to cool no respond fans not running or the ac kick. Seem like its dead... but I switch it to heat it work just fine. What m I doing wrong.?
    talkinggoat's Avatar
    talkinggoat Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Aug 17, 2010, 02:41 PM

    Sounds like you didn't hook something back up right... double check your wiring. Do you have a schematic?
    nikk1973's Avatar
    nikk1973 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 18, 2010, 11:25 AM
    Hmm thank let me look at it this evenning.. thank u oh yes I do.have one
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fan not blowing [ 1 Answers ]

Air conditioning feels cool near vents, but doesn't seem to be blowing -the air handler sounds like it is running - any suggestions on what problem may be?

Fan blowing but not igniting [ 1 Answers ]

Have a 6 yr old comfortmaker NDN3/NDF furnace and fan seems to be blowing all the time. Everything seems to be clear and everything but it does not seem to be igniting even if I crank the heat level up on the thermostat. Have a honeywell thermostat and I changed the batteries just in case it was...

AC Fan blowing continuously [ 1 Answers ]

I have never worked with AC's but was asked to look at a issue after someone had already removed a thermostat. The plan was for them to replace old with new digital. There are 8 existing wires on old unit and new digital schematic only shows wiring diagram for up to 5 wires. I decided to try put...

Furnace fan keeps blowing [ 1 Answers ]

Carrier Furnace. My furnace blower stays on after shutdown. Keep getting a code 33 which says flame rollout switch is open. How do I bypass them or tell if they are bad? Had control board replaced afew months ago. If I let the system sit a couple of hours, it will usually reset. Please help.

Fan constantly blowing [ 3 Answers ]

A couple of years ago, I replaced our old mercury style thermostat with a digital one. It worked fine for a while. Maybe a year later, we noticed that the heat would kick on and off fine, however, the fan blows constantly (usually blowing unheated air). The only way to turn off the blowing is...

View more questions Search