Ask Experts Questions for FREE Help !
Ask
    ramintl's Avatar
    ramintl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2010, 07:34 PM
    Braeburn thermostat reads -AC
    The air is not coming on and the thermostat reads -AC?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Aug 14, 2010, 09:01 PM

    The "-" may mean No and the AC may be no AC power.

    This may suggest a tripped breaker, a blown fuse on the control board or a bad step down transfomer.

    For, now I'm guessing.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Aug 14, 2010, 09:06 PM
    Quote Originally Posted by ramintl View Post
    The air is not coming on and the thermostat reads -AC?
    Is outside condenser unit working?
    If so feel the biggest of the 2 copper lines going into the house,is it very cool or cold?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Braeburn 5000 Thermostat [ 1 Answers ]

When I turn the thermostat to heat, at first it would come on for a few seconds and quickly shut off but no it doesn't come on at all. When I put it on cool, it works fine. Please help me with this issue.

Thermostat reads -ac [ 5 Answers ]

Have carrier furnace, the thermostat reads -ac blower motor runs, have on all the time, pre blower works also, if set at 75 it clicks on like it wants to work then -ac pops up on thermostat, tried new batt in thermostat. Any help would be appreciated.

Braeburn thermostat no power [ 12 Answers ]

Braeburn thermostat no power. Help!

Wiring a Braeburn thermostat on a trane HP [ 7 Answers ]

Hi,I have a Trane HP.It is a package unit(one piece heat and cool).I am trying to wire up a Braeburn model 3000 thermostat to it.The wiring diagrams do not help.The trane is a 3 ton unit with heat strips.The wiring diagram on it shows typical wiring for a seven wire connection to thermostat.The...

Hunter thermostat reads no a/c power [ 7 Answers ]

We just purchased a hunter thermostat model 44760 to replace the old thermostat when our a/c went out and it reads no a/c power. We have a trane heat pump. We've also replaced the fuses outside next to our heat pump and nothing is working. I believe our wiring is correct. Can anyone help? Thanks....

View more questions Search