Ask Experts Questions for FREE Help !
Ask
    neal124's Avatar
    neal124 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 3, 2010, 11:03 AM
    Bryant furnace overheat and fire
    I had a technician replace a draft inducer assembly in my Bryant high efficiency gas furnace. 15 minutes after he left heavy black smoke poured from the furnace. Turned out the plastic condensate drip pan melted and caused all the smoke damage and also caused damage to the freon tubing. The draft inducer had no fire damage. Any idea what went wrong.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Aug 3, 2010, 02:56 PM

    It would need to be field inspected to come to a conclusion.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Switch furnace to emergency mode on my Bryant 90 furnace [ 2 Answers ]

I have run out of propane and we are in the middel of a blizzard. How can I switch my furnace to emergency mode? Thanks, Brett

Bryant furnace HSI light comes on but doesn't ignite the fire [ 3 Answers ]

I have a bryant furnace model 373lav036035 fan comes on and igniters glow for about two minutes and shut off but the fire doesn't come kick on but I think it shuts off blower and igniter because gas valve doesn't kick on and let out flame can you tell me what the problem is

My furnace won't fire up [ 3 Answers ]

I have a Keeprite SP 80 High Efficiency model # NUG5075BFB2 the pilot is lit but the furnace won't fire the thermostat( new batteries) is set for 70. The filter is clean, I tried turning everything off including the gas and the thermostat then turned everything back on the pilot is on but the...

Furnace does not fire up [ 1 Answers ]

I have a gas furnace... when I will hear a clicking sound when the furnace is ready to fire up but it doesn't I see the pilot light go on but the blower does not not go on either... on the auto setting... On the fan on setting the blower fan will go on,, the burner clicks but will not fire...

Furnace will not fire [ 1 Answers ]

I have a comfortmaker GNJ075n12a1 80% furnace installed in 96 the igniter come on and the blower comes on and the system cycles a couple of times before the control locksout on during this time the gas valve is not energizing to fire the furnace if you shut the system down for a couple of...

View more questions Search