Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replaced contactor and still won't go on.unless I keep the 2 buttons on the contactor
[ 10 Answers ]
I replaced the contactor on outside unit it will not go on unless we hold the 2 button like things down. Once we let go it turns back off.. What could it be now
Contactor Replacement
[ 1 Answers ]
I have a contactor by GE that has failed, I would like to know if there is a replacement part other than trying to get a GE contactor. Listed below are the info on the contactor: Single phase per pole CR453CB3HBAFG VAC: FLA IRA ...
Contactor Replacement
[ 6 Answers ]
I have received my new contatctor and am ready to replace it. There are two sides I see on it. L1 and L2, and T1 and T2. Any advice from the professionals before I swap it out. I am very happy with the results on my new fan, motor, and cap. Only the contactor remains. If the old contactor doesn't...
Looking for a replacement contactor
[ 5 Answers ]
I have a fairly old Coleman compressor unit I need to replace the contactor in.. heres a pic of it : http://i174.photobucket.com/albums/w110/sudave5/Picture001.jpg Can you please give me a part number or style that I need to buy.. thanks
Contactor replacement on Home Condenser
[ 2 Answers ]
Hello, My outside Condenser is not kicking on. Air Handler and thermostat OK indoors. I checked the Contactor and it looks extremely dirty and pitted although not fused together. If I hold down contacts manually, Condenser / fan etc. starts and is blowing cold air. Once I release Unit stops... View more questions Search
|