Ask Experts Questions for FREE Help !
Ask
    donnaco's Avatar
    donnaco Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2010, 06:01 PM
    How do you check the door switch on a Whirlpool Electric Dryer?
    Just a quick question.
    shulta44's Avatar
    shulta44 Posts: 97, Reputation: 4
    Junior Member
    		  
    #2

    Jun 24, 2010, 04:32 AM

    You can jump it out and see if dryer runs. You can remove 1 wire and ohm it out. With door open you should read nothing, push it in/ close door and you should read resistance. Is it getting voltage?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Electric Dryer [ 1 Answers ]

Do you have a diagram on how a Whirlpool Electric Dryer's electrical plug attaches to the back of the dryer?

Whirlpool Dryer Door Switch Knocked loose [ 1 Answers ]

How Do You Fix That?

Whirlpool Electric Dryer [ 1 Answers ]

Our dryer is making this loud, terrible squeaking noise. At first it was just with a heavy load now it's all the time. Bearings, belt? Is it easy enough to do it myself or do I need a repair person? Thanks, Jpunt

Replacing Door Switch in Whirlpool Gas Dryer [ 2 Answers ]

I am replacing a door switch that broke off on my Whirlpool Gas Dryer. I have searched the internet for instructions on how to replace it (I have located the replacement part and purchasing the part today) but have had no luck in locating instructions on how to replace the part. I am hoping to...

Whirlpool Electric Dryer [ 1 Answers ]

I have a Whirlpool electric dryer that won't heat. Checking the heating element with ohm meter reads zero ohms. All connections to heatingf element have power. Any help ? Steve

View more questions Search