Ask Experts Questions for FREE Help !
Ask
    jpunt's Avatar
    jpunt Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 26, 2007, 09:58 AM
    Whirlpool Electric Dryer
    Our dryer is making this loud, terrible squeaking noise. At first it was just with a heavy load now it's all the time.

    Bearings, belt? Is it easy enough to do it myself or do I need a repair person?

    Thanks,
    Jpunt
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Jul 26, 2007, 10:27 AM
    Could be the drum bearing or the rollers. Not difficult to do if you think you think you can get the drum out.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Electric Dryer Problem [ 2 Answers ]

I have a Whirlpool electric dryer model# LEC8858EQ1. It seems to work fine except often it does not fully dry the clothes. I have check and cleaned all lint from the screens, back and the vent going outside so that is not the problem. I just replaced the two thermostats and that did not fix the...

Whirlpool Electric Dryer, Heats up.does not tumble [ 1 Answers ]

Hello, This is my first question on the site. Thanks for lloking it over. I have an Electric Whirlpool dryer. The dryer just stopped working on my wife today. I went down and inspected it, and I found it to be very hot. I unplugged the dryer for safety purposes, and I wanted it to cool...

Whirlpool Electric Dryer [ 1 Answers ]

I have a Whirlpool electric dryer that won't heat. Checking the heating element with ohm meter reads zero ohms. All connections to heatingf element have power. Any help ? Steve

Whirlpool electric dryer not fully drying [ 2 Answers ]

I have a whirlpool electric dryer model number gew9868kq0. When I have a little load it dries OK in auto mode. When I have a med to full load I have to start it up a few times to dry in auto sensing mode. Any help would be great... Mike


View more questions Search