Ask Experts Questions for FREE Help !
Ask
    zdavez's Avatar
    zdavez Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2010, 12:41 PM
    Troy bilt primer
    Primer bulb on troy bilt lawnmower is not squirting gas into carbuerator--how to correct?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 7, 2010, 07:30 PM

    Likely problems are holes in the primer bulb or the lines leading to it. If this is a diaphram carb, then the diaphram could be shot.

    You failed to mention if you can start the engine using carb cleaner.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy Bilt Weedeater [ 1 Answers ]

My Troy Bilt TB20CS weedeater will run for approx 30 seconds, then shuts off. Took it apart looking for a clogged screen/filter. No luck. Any suggestions.

Troy Bilt has no fire [ 1 Answers ]

I have a new troy bilt pony, it's been used twice after the second time I was going to put it in the shed and when I turned the key nothing happened, I thought the keys was left on. I pushed it in the shed and the next week before I used it I charged the battery, when I put the charger on the...

New troy bilt tiller [ 2 Answers ]

Purchased a new troy bilt 4 cycle tiller, less than 10 hours ran great. Now will only run in chock, will allow to go half way to half chock,idles up, but can't get enough power to till. Any help will be greatly appreciated. Wes

View more questions Search