Ask Experts Questions for FREE Help !
Ask
    Maverick1313's Avatar
    Maverick1313 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 3, 2009, 01:42 PM
    Troy Bilt has no fire
    I have a new troy bilt pony, it's been used twice after the second time I was going to put it in the shed and when I turned the key nothing happened, I thought the keys was left on. I pushed it in the shed and the next week before I used it I charged the battery, when I put the charger on the battery it registerd 80%, I charged it to 100%. Still nothing, I've checked all the connections and made sure the parking break swithch was engaging and the blade is up... need help please
    21boat's Avatar
    21boat Posts: 2,441, Reputation: 212
    Ultra Member
    		  
    #2

    Jul 3, 2009, 04:36 PM

    Check the solenoid. Turn key on and use a screw driver to jump the solenoid to see if the starter will kick in. In not then you have a bad solenoid. Sometimes tapping it will get the electrico magnets to work also but that still needs replaced if no current goes through it or gets hung up inside.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy bilt 6.5hp [ 1 Answers ]

Motor died out black smoke puffs out... it was working find then the next minute it started to slow down. I try to clean out the filter in the side but that did not help... then I try to clean out the spark plug but that did not help. It has plenty of gas and oil what should I do?:confused:

Troy-Bilt PTO [ 1 Answers ]

My pto will not engage how do I check if relay or switch is bad? I checked at the plug for the clutch and I am not getting power.

Troy Bilt won't Fire [ 4 Answers ]

Troy Bilt Model #3AQ609G063, 18hp B/S engine Twin II (model # for engine is42A707). I replaced the starter,solenoid, and it has a new battery. When I turn the key nothing. I jump the solenoid and the starter turns. I jump the starter and it turns. There is plenty of gas getting to the carb but, no...

View more questions Search