 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
85 dodge ignition switch burned
I have an 85 Dodge truck with a 360 in it the fusible link for the ignition switch melted I replaced it it melted again the ignition switch was hot as well so I replaced it. I noticed some of the wiring going to the ignition switch had melted put all new in The red wire and blue wire. Drove for a day and just died it blew a fuse were the fusible link was which I replaced with a fuse put new fuse in blows it instantly put a circuit breacker in for testing and again the red and blue wire get very hot under the dash to the ignition switch before the circuit breaacker pops. Please help
|
||||
Check out some similar questions!
Just got truck, alt. spiked melted red wire that goes to resistor block. Fixed wire but cannot get coil to fire now. What does this usually burn out in the electronic ignition?
This a long question, but I'm trying to give a lot of details. I appreciate any help! I have a hanging light in dining room that is turned on by one of those round dimmer switches, and its on the same wall panel as a regular flip light switch that turns on the garage light on the other side of the...
We have a unit that is central air and electric furnace combined. It was originally Intertherm, but the outside part (compressor?) has been replaced with a Rheem. The inside part is now 11 years old. I do not understand all of this, so please bear with me... I am trying to communicate it as...
I have a 2004 dodge ram 2500, the ignition switch seems to be locked anyone have any answers for me - key will not budge.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
