Ask Experts Questions for FREE Help !
Ask
    cgueiros's Avatar
    cgueiros Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 16, 2010, 08:45 AM
    LEVITRON PR180 Photo Electric switches in 2 wire 110VAC outlets?
    I have bought several Levitron PR180 Photo Electric switches and am overseas where 110VAC outlets only have 2 wires (one hot, one ground). Could anyone assist telling me if it will be possible (and how to do it) hooking up these switches to work in the Auto position?

    Thanks a lot.

    Clarindo
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #2

    May 16, 2010, 09:21 AM
    How do you propose to use a switch in an outlet? What exactly are you trying to do?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How can I wire 1-110vac and 1-220vac outlet on a 4 wire 220vac extension cord? [ 2 Answers ]

I have a 220vac 3 wire extension cord to which I wish to add a 110vac outlet as a convenience. Can this be done safely since there is no ground wire?

Install PR180 with fixture between two three-way switches [ 1 Answers ]

Hello. I am installing a Leviton PR180 and the diagram provided is not working for me. My belief is that it is because the load is located between switch 1 and the PR180, and not at the end, as shown in their diagram. That being said, I tried the following combinations with no results. Assuming...

Levitron Combination 3 Switches [ 1 Answers ]

1755 Model The old three single pole switches were wired with 6 + 1 ground wire. The new Three Single-Pole Rocker Switch has 3 + 1 connection. How do I wire this (the diagram was missing from the box).

Levitron PR180 Buzzing [ 1 Answers ]

I've just about had it with Levitron devices. I fell in the usual hole regarding wiring the thing in 3 way mode (Nice job with that diagram Levitron !) , now after a few weeks of running, the unit has started buzzing whenever it triggers to the "On" state. It makes the breaker in the breaker box...

Levitron PR180 troubleshooting [ 2 Answers ]

I'm struggling to get a Levitron PR180 3 way switch to power a fluorescent fixture. I seem to get better performance in the ON position vs. AUTO which is the motion sensor setting. Please help.

View more questions Search