Ask Experts Questions for FREE Help !
Ask
    dijits27's Avatar
    dijits27 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 9, 2008, 03:06 PM
    Levitron Combination 3 Switches
    1755 Model

    The old three single pole switches were wired with 6 + 1 ground wire.

    The new Three Single-Pole Rocker Switch has 3 + 1 connection.

    How do I wire this (the diagram was missing from the box).
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 10, 2008, 04:21 AM
    The one connection is common hot to all three, the three goes out to 3 switched items.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

3way switches and motion sensor combination wireing [ 3 Answers ]

I would like to know how to wire up two 3way switches and motion sensor combined. Sequence of operation is as follows; when you walk in room motion sensor detects motion turns the lights on but you can also control the same flouresant lights by using the 3way toggle swithes so you basically have...

Levitron PR180 Buzzing [ 1 Answers ]

I've just about had it with Levitron devices. I fell in the usual hole regarding wiring the thing in 3 way mode (Nice job with that diagram Levitron !) , now after a few weeks of running, the unit has started buzzing whenever it triggers to the "On" state. It makes the breaker in the breaker box...

Levitron PR180 troubleshooting [ 2 Answers ]

I'm struggling to get a Levitron PR180 3 way switch to power a fluorescent fixture. I seem to get better performance in the ON position vs. AUTO which is the motion sensor setting. Please help.

Combination Permutation? [ 3 Answers ]

In how many ways can the batting order be determined for a coed softball team w/ five women and four men if a) there are no restrictions b) the women must all bat first c) the first and ninth batters must be men

Levitron 3 Way Motion Sensor Wall Switch [ 2 Answers ]

I have power coming in from the basement to the first floor 3 way switch with a 4 way switch on the second floor and a 3 way on the top floor. The 3 way on the third floor appears to go to the lights. The 4 way has two wires going down as travelers to the first floor and two wires as teavelers to...

View more questions Search