Ask Experts Questions for FREE Help !
Ask
    josh915's Avatar
    josh915 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 8, 2010, 12:45 PM
    Bryant furnace
    I have a bryant furnace with code 12 flashing need help
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    May 8, 2010, 02:53 PM
    I say this because many people don`t no,but most furnaces have the codes and what they are coding glued /attached to the inside of bottom door/cover of furnace
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Switch furnace to emergency mode on my Bryant 90 furnace [ 2 Answers ]

I have run out of propane and we are in the middel of a blizzard. How can I switch my furnace to emergency mode? Thanks, Brett

Bryant furnace [ 2 Answers ]

When my Bryan furnace (310 AAV-JAV) turns on, the fan noise seems too loud at the start and also comes with a "rainy" sound in the background. The fan noise dies down some after the initial burst. All the noise goes away when it is off. We only noticed this kind of loud noise lately. Thanks...

Bryant furnace [ 0 Answers ]

My Bryant furnace doesn't do anything. The indicator light on the control board is on all the time, no fault code. New t-stat, new ignitor have followed all instructions inside panel. Does not fire. Model # 312JAV036070

Bryant furnace [ 1 Answers ]

I have a bryant from 1991. When I turn up heat the fan starts then ignitor starts, lights pilot and will run like that for about 5mins then shuts down and won't try to relight until I reset the power. When the pilot lights the flame is kind of weak. The blower is blowing it hard and it will...

View more questions Search