Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing a new toilet and can't get wax ring to seal
[ 10 Answers ]
I have a tiled basement bath with the closet flange sitting on top of the tile. When I set the toilet and tighten the toilet bolts part way the seal is OK. If I tighten the bolts and draw the toilet to the floor it leaks. The under side of the toilet only allows about a 1/2" of room for the...
Toilet wax ring
[ 4 Answers ]
Hey guys, I am rwady to install the toilet. My question is as follows... I went to Home depot and the guy gave me a wax ring with an ABS collar on it. He says that is what I need since my flange is ABS. Is it okay to use this style or should I be using just the rgular standard wax ring....
Wax ring replacement
[ 3 Answers ]
I'm remodeling an upstairs bathroom. Have the toilet tank pulled (so I can paint) and will be re caulking around the toilet and replacing the white caps/gasket on the toilet to floor. While I've got this thing dismantled, should I pull the whole toilet and replace the wax ring? House is about 7...
Trouble replacing an OLD toilet wax ring
[ 10 Answers ]
When I removed my toilet from the floor, I found that the johnny bolts are fixed to the old base and cannot be switched out. The problem is, that I had to hack-saw one of them off due to the rust build up. This toilet is the original one from 1958 with the original wax ring. It seems that the pipe...
Standard or oversize toilet wax ring
[ 1 Answers ]
How do I determine whether I need a standard toilet wax ring versus the thicker wax ring? Is there a gap distance that would suggest one over the other. I installed tile and now have a 1/2 inch gap between the flange surface and the floor (tile) surface. View more questions Search
|