Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant Heat Pump Capacitor
[ 6 Answers ]
The capacitor on my bryant heat pump was bad and I got a new one. 1) the new one is oval and the old one was round. Is it OK if I use this new one or should I try to buy a round one as well? 2) there are three different color wires so when I discoonected the old capacitor, I did not write down...
Carrier/Bryant Furnace control board .
[ 9 Answers ]
I replaced Carrier/Bryant board and the led is flashing rapidly.. what can be wrong? It looked like there's problem with polarity,but everything is fine, the led is still flashing.. uff.. Led Code: Continuous on rapid flashing-Line voltage 115 polarity reversed.If twinned,refer to twinnig kit...
How do I change the aux heat setting on my bryant a07045 with heat pump
[ 1 Answers ]
How do I change the aux heat setting on my bryant a07045 with heat pump
I have a Carrier 24HNA636A310 Heat pump. Does the Heat pump mode run on both speeds?
[ 0 Answers ]
I have a new Carrier Infinity 25HNA636A310 compressor. Does it run in both speeds when in heat mode
Is a carrier furnace compatible with a bryant airconditoning unit
[ 1 Answers ]
I have a carrier furnace in my home. And my hvac guy wants to install a bryant airconditioning unit because that's what they have in stock at the time. Concerned about compatibility. View more questions Search
|