Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
A/c port valves
[ 4 Answers ]
I have a 98 yukon who's a/c system has given me trouble and more trouble. I had the system charged up around October last year. Ran it a few times then winter came and no need to run it. When it got hot again(in march) I had to charge it back up. It ran for a month and noticed I had to charge it...
Opening my port
[ 2 Answers ]
How do I open my port on my router for a netgear wgt624 :( :(
Lennox electric furnace, blower off alignment, rubbing housing
[ 1 Answers ]
Excuse my lack of mechanical knowledge and I hope I can explain the problem in an understandable way. The blower on the electric furnace has gotten out of alignment(?) and is rubbing the housing(?). I can put it in the correct position so it does not rub by physically holding the shaft but cannot...
Clogged Inlet Port - Low Pressure in Shower
[ 3 Answers ]
Hi, I have always had low hot water pressure in my master shower ever since the house was renovated. I have followed the advice on this site, and it is clear that it is a clog in the hot water line. I then decided that it would be brilliant to shove a semi soft plastic homemade snake device down...
Replace data/fax port with firewire port
[ 2 Answers ]
I want to buy a dell inspiron 531 computer from costco. It has a TV tuner and a 56K PCI Data/Fax Modem. I know the TV tuner uses one of the two available pci slots, but does a data/fax modem use anothwer pci slot? I want to have an open pci slot so I can add a firewire port. If the data/fax uses a... View more questions Search
|